10-24 X 1 1/4 Thumb Screws / Type P / No Shoulder / Steel / Zinc / 2,000 Pc. Carton

10-24 X 1 1/4 Thumb Screws / Type P / No Shoulder / Steel / Zinc / 2,000 Pc. Carton Reviews

Other Picture

10-24 X 1 1/4 Thumb Screws / Type P / No Shoulder / Steel / Zinc / 2,000 Pc. Carton Feature

• 10-24 X 1 1/4 Thumb Screws
• Type P
• Low Carbon Steel
• Zinc Plated

10-24 X 1 1/4 Thumb Screws / Type P / No Shoulder / Steel / Zinc

Visit Store Now !!

Detail Products

Detail Reviews

Jun 01, 2011 00:42:04

Stainless Steel Thumb Screw, Knurled Head, #10-32, 3/4" Head Diameter, 3/16" Head Height, 1-1/4" Length (Pack of 5)

Stainless Steel Thumb Screw, Knurled Head, #10-32, 3/4" Head Diameter, 3/16" Head Height, 1-1/4" Length (Pack of 5) Reviews

Other Picture

Stainless Steel Thumb Screw, Knurled Head, #10-32, 3/4" Head Diameter, 3/16" Head Height, 1-1/4" Length (Pack of 5) Feature

• Thumb Screws allow for simple "by-hand" installation
• Stainless Steel is suitable where formability and cost are important considerations
• Knurled head provides extra grip for manual tightening
• Tools not necessary for tightening or loosening
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Thumb screws are designed to be tightened and loosened by hand. They come in a variety of head styles, but each includes an easy-grip head which allows for simple "by-hand" installation.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Usually found on thumb screws, a knurled surface on the head gives a better gripping surface, making it easier to tighten or loosen fasteners manually.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)
• Alloy Steel Socket Cap Screw, Hex Socket Drive, 1/4"-28, 2-1/4" Length (Pack of 25)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, MIL-SPEC, 1/4"-28, 2" Length (Pack of 10)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #10-32, 2-1/2" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #0-80, 1/4" Length (Pack of 100)

Detail Reviews

May 30, 2011 04:01:24

10-32 X 3/4 Thumb Screws / Type P / Shoulder / Steel / Zinc / 1,000 Pc. Carton

10-32 X 3/4 Thumb Screws / Type P / Shoulder / Steel / Zinc / 1,000 Pc. Carton Reviews

Other Picture

10-32 X 3/4 Thumb Screws / Type P / Shoulder / Steel / Zinc / 1,000 Pc. Carton Feature

• 10-32 X 3/4 Thumb Screws
• Type P
• Low Carbon Steel
• Zinc Plated

10-32 X 3/4 Thumb Screws / Type P / Shoulder / Steel / Zinc

Visit Store Now !!

Detail Products

Detail Reviews

May 29, 2011 07:51:04

Thumb Screw With Shoulder Zinc 1/4-20 X 3/8 (Pack of 800)

Thumb Screw With Shoulder Zinc 1/4-20 X 3/8 (Pack of 800) Reviews

Other Picture

Thumb Screw With Shoulder Zinc 1/4-20 X 3/8 (Pack of 800)

Visit Store Now !!

Detail Products

Detail Reviews

May 27, 2011 21:03:04

Thumb Screw With Shoulder Zinc 8-32 X 1 (Pack of 2,000)

Thumb Screw With Shoulder Zinc 8-32 X 1 (Pack of 2,000) Reviews

Other Picture

Thumb Screw With Shoulder Zinc 8-32 X 1 (Pack of 2,000)

Visit Store Now !!

Detail Products

Detail Reviews

May 26, 2011 20:33:06

RAF Electronic Hardware AJ-527 Plain Knurled Thumb Screw 8-32 Thd., 5/8 Long

RAF Electronic Hardware AJ-527 Plain Knurled Thumb Screw 8-32 Thd., 5/8 Long Reviews

Other Picture

Knurled Head Screws - Knurled Thumb Screws Steel - Stainless Steel - Aluminum - Brass - General purpose thumb screws for a wide variety of applications. The washer face provides an excellent bearing surface and extends the height of the knob from the surface. Steel is zinc coated. Stainless and aluminum have plain finish. Brass is zinc, clear chromate plated. CAD drawing for this part is available on our website.

Visit Store Now !!

Detail Products

Detail Reviews

May 25, 2011 08:43:04

Nylon 6/6 Thumb Screw, Knurled Head, Slotted Drive, M5-0.8, 8mm Length (Pack of 100)

Nylon 6/6 Thumb Screw, Knurled Head, Slotted Drive, M5-0.8, 8mm Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Thumb Screw, Knurled Head, Slotted Drive, M5-0.8, 8mm Length (Pack of 100) Feature

• Thumb Screws allow for simple "by-hand" installation
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Knurled head provides extra grip for manual tightening
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Thumb screws are designed to be tightened and loosened by hand. They come in a variety of head styles, but each includes an easy-grip head which allows for simple "by-hand" installation.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Usually found on thumb screws, a knurled surface on the head gives a better gripping surface, making it easier to tighten or loosen fasteners manually. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M4-0.7, 25mm Length (Pack of 100)
• Nylon 6/6 Machine Screw, Pan Head, Phillips Drive, M5-0.8, 25mm Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 1/4", 0.260" ID, 0.562" OD, 0.06" Thick (Pack of 100)
• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #0-80, 1/4" Length (Pack of 100)

Detail Reviews

May 24, 2011 11:58:05

Nylon Thumb Screw, Knurled Head, Slotted Drive, M5-0.8, 20mm Length (Pack of 25)

Nylon Thumb Screw, Knurled Head, Slotted Drive, M5-0.8, 20mm Length (Pack of 25) Reviews

Other Picture

Nylon Thumb Screw, Knurled Head, Slotted Drive, M5-0.8, 20mm Length (Pack of 25) Feature

• Thumb Screws allow for simple "by-hand" installation
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Knurled head provides extra grip for manual tightening
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Thumb screws are designed to be tightened and loosened by hand. They come in a variety of head styles, but each includes an easy-grip head which allows for simple "by-hand" installation.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Usually found on thumb screws, a knurled surface on the head gives a better gripping surface, making it easier to tighten or loosen fasteners manually. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M4-0.7, 25mm Length (Pack of 100)
• Nylon 6/6 Machine Screw, Pan Head, Phillips Drive, M5-0.8, 25mm Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 1/4", 0.260" ID, 0.562" OD, 0.06" Thick (Pack of 100)
• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #0-80, 1/4" Length (Pack of 100)

Detail Reviews

May 23, 2011 12:22:03

Nylon 6/6 Thumb Screw, Knurled Head, Slotted Drive, 1/4"-20, 1/4" Length (Pack of 100)

Nylon 6/6 Thumb Screw, Knurled Head, Slotted Drive, 1/4"-20, 1/4" Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Thumb Screw, Knurled Head, Slotted Drive, 1/4"-20, 1/4" Length (Pack of 100) Feature

• Thumb Screws allow for simple "by-hand" installation
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Knurled head provides extra grip for manual tightening
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Thumb screws are designed to be tightened and loosened by hand. They come in a variety of head styles, but each includes an easy-grip head which allows for simple "by-hand" installation.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Usually found on thumb screws, a knurled surface on the head gives a better gripping surface, making it easier to tighten or loosen fasteners manually. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 1" Length (Pack of 100)
• Nylon 6/6 Thumb Screw, Knurled Head, 1/4"-20, 1" Length (Pack of 10)
• Nylon 6/6 Thumb Nut, #10-24 (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #2-56, 1/8" Length (Pack of 100)
• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)

Detail Reviews

May 21, 2011 17:21:11

Peerless MIT-86 Wing Thumb Screw 1/4-20 Thd., 3/4 Long

Peerless MIT-86 Wing Thumb Screw 1/4-20 Thd., 3/4 Long Reviews

Other Picture

Thumb Screws - Thumb and Wing Screws Malleable Iron - These thumb and wing screws are made from malleable iron and have a tumbled finish. Used for fastening, construction of jig and fixtures, tooling and special applications. Style A does not have a shoulder. CAD drawing for this part is available on our website.

Visit Store Now !!

Detail Products

Detail Reviews

May 20, 2011 16:10:05

Nylon 6/6 Thumb Screw, Knurled Head, Slotted Drive, 1/4"-20, 5/16" Length (Pack of 100)

Nylon 6/6 Thumb Screw, Knurled Head, Slotted Drive, 1/4"-20, 5/16" Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Thumb Screw, Knurled Head, Slotted Drive, 1/4"-20, 5/16" Length (Pack of 100) Feature

• Thumb Screws allow for simple "by-hand" installation
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Knurled head provides extra grip for manual tightening
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Thumb screws are designed to be tightened and loosened by hand. They come in a variety of head styles, but each includes an easy-grip head which allows for simple "by-hand" installation.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Usually found on thumb screws, a knurled surface on the head gives a better gripping surface, making it easier to tighten or loosen fasteners manually. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 1" Length (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #2-56, 1/8" Length (Pack of 100)
• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Nylon 6/6 Thumb Screw, Knurled Head, 1/4"-20, 1" Length (Pack of 10)
• Nylon 6/6 Thumb Nut, #10-24 (Pack of 100)

Detail Reviews

May 19, 2011 17:15:05

5/16-18 X 1 1/4 Thumb Screws / Type P / No Shoulder / Steel / Zinc / 400 Pc. Carton

5/16-18 X 1 1/4 Thumb Screws / Type P / No Shoulder / Steel / Zinc / 400 Pc. Carton Reviews

Other Picture

5/16-18 X 1 1/4 Thumb Screws / Type P / No Shoulder / Steel / Zinc / 400 Pc. Carton Feature

• 5/16-18 X 1 1/4 Thumb Screws
• Type P
• Low Carbon Steel
• Zinc Plated

5/16-18 X 1 1/4 Thumb Screws / Type P / No Shoulder / Steel / Zinc

Visit Store Now !!

Detail Products

Detail Reviews

May 18, 2011 15:14:06

5/16-18 Thd., 3/4 Lg., Nylon Tipped Thumb Screws, Zinc Plated Steel (1 Each)

5/16-18 Thd., 3/4 Lg., Nylon Tipped Thumb Screws, Zinc Plated Steel (1 Each) Reviews

Other Picture

Thumb Screws - Thumb Screws Nylon Tipped - Stamped P thumb screw. Low carbon steel, zinc plated. CAD drawing for this part is available on our website.

Visit Store Now !!

Detail Products

Detail Reviews

May 17, 2011 10:37:03